Wiring is one of the most common sources of trouble in an older vehicle. Insulation hardens and cracks with age, connectors and grounds corrode, and years of repairs and add-ons leave a harness that is hard to trace and easy to short. At Innovative Restorations in Wallingford, Connecticut, we diagnose and repair classic car electrical problems, and we fabricate and replace complete wiring harnesses for classic cars, muscle cars and vintage trucks.

Common Classic Car Electrical Problems

Most owners come to us with one of a few complaints. Lights that dim or flicker, gauges that read wrong or not at all, a battery that keeps going flat, fuses that keep blowing, or a charging system that cannot keep up. A burning smell or any sign of melted insulation is the most serious of all and should be checked right away, because damaged wiring is a fire risk.

Many of these problems trace back to the same causes: tired insulation, corroded connections, poor grounds and old splices from past repairs. Finding the real cause, rather than replacing parts until the symptom goes away, is where most of the work is.

Wiring Harness Fabrication and Replacement

We offer complete wiring harness fabrication and replacement. You can choose an OEM-style harness that keeps the factory look and layout, or a modernized version with updated fuses and waterproof connectors. Either way, the goal is a clean, properly routed system you can trust every time you turn the key.

Repair or Rewire?

Not every electrical problem needs a new harness. If the trouble is limited to one circuit and the rest of the wiring is in good shape, a targeted repair is often enough. If the insulation is brittle throughout, the harness has been heavily modified, or you are adding new equipment, a full rewire is usually the better long-term answer. We inspect the system first and explain the options before any work begins.

Modern Comforts Without Changing the Look

Updated wiring also makes it possible to add features that make a classic easier to live with. We can add Bluetooth audio and heated seats with little to no visual change to the vehicle. Electronic ignition and charging system improvements are popular too, and they pair well with an engine rebuild. See all of our mechanical upgrades, or read about restomods if you want to combine several upgrades while keeping the classic style.

Rewiring During a Restoration

If your car is coming in for a full restoration, that is the best time to replace the harness. With the interior out and the body apart, every run can be routed and secured properly, and you start the finished car with a fresh electrical system instead of decades-old wiring.

Wiring and Electrical FAQ

Do you rewire the whole car or fix individual circuits?

Both. If a problem is limited to one circuit, such as a single light or gauge, we can usually repair it. If the insulation is brittle throughout or the harness has been spliced and modified over the years, a complete new harness is often the safer and more reliable choice. We inspect the wiring first and explain which route makes sense.

Can a new harness look original?

Yes. We can build an OEM-style harness that keeps the factory look, or a modernized version with updated fuses and waterproof connectors. Many owners choose the modern version for reliability while keeping it out of sight.

Can you add modern features like Bluetooth or heated seats?

Yes. We can add modern touches such as Bluetooth audio and heated seats with little to no visual change to the vehicle.

Why do older cars have so many electrical problems?

Wiring in an older vehicle has usually been through decades of heat, vibration and moisture, plus repairs and add-ons by previous owners. Insulation hardens and cracks, connectors and grounds corrode, and circuits end up carrying more load than they were designed for. That leads to flickering lights, dead gauges, battery drain and, in the worst cases, melted wiring.

How much does classic car rewiring cost?

It depends on the vehicle, how much of the wiring needs work, and whether you want an original-style or modernized harness. We look at the car and give you a line-item estimate before any work begins.

Get an Estimate

Tell us about your vehicle and the problem you are having. Request an estimate online, with photos if you have them, or contact us at our Wallingford, CT shop.

The Auto Restoration Service Process

Red Restored Car

Disassembly

Vehicles are fully disassembled, parts condition is assessed and parts are labeled.

Automobile restoration example of paint stripped to there bare substrates.

Metal Repair

Vehicle body is measured and braced, mounted on vehicle dolly, and then all necessary parts are media blasted to its bare substrate.

Auto restoration paint primer job

Epoxy Prime

Vehicles are then epoxy primed, then sent over to the metal shop for structural and nonstructural repairs.

Truck restoration final assembly

Test Fit

While their body panels and trim are test fit on the vehicle to ensure a smooth final assembly

Body work then two stages of priming and blocking.

Body Work

Onto the body shop for body work then two stages of priming and blocking.

Restoration paint job of fully disassembled and taped car

Paint

Once body work is completed the vehicle is fully disassembled, prepped, tapped and painted.

blue and white truck being polished

Wet Sand & Polish

Next wet sand and polish.

Final assembly in our restoration shop

Assembly

Lastly, final assembly for delivery.

What Customers Say

Be sure to choose, “Submit A Review” from within the drop-down menu of the form.

Trusted Partners

We don’t just focus on performance and skills, we also use quality parts and services to ensure our customers are always getting the best. Here are some of the trusted companies Innovative Restorations is proud to partner with.